Here's my toolkit. Screenshot_20240519-222511~2.png Screwdrivers, motorcycle toolkit pliers, valve stem extensions, spare key, spare canopy lock pin, spare pitot tube, dipstick puller, paper towel, flat wrench for the EarthX terminals, tire gauge. On my spare tube I also have a valve cap with a buil...
Bryan Cotton wrote:I'm sure I did a sketch somewhere. If I can find it I'll share it.
I measured my pattern and recreated my sketch. Your partner could easily make this up and you could bring it with you. Darick and I both built A models bought at a very similar time.
Here is a sketch: Edit this sketch is the finished dimensions of the baggage area flat pattern. Fabric cutout will be larger for velcro, and for stitching the corners up as described below. Screenshot_20240519-124104.png In case my writing is hard to read: The trapezoid is 36.75" along the seat...
Just to tie the two threads together, I ultimately figured out a solution to the high #1 EGT: https://sonexbuilders.net/viewtopic.php?f=7&t=7674 One thing I've noticed over the years is greater RPM at high density altitudes. I've always assumed it is because of the thinner air causing less load ...
That’s awesome! My partner is quite the seamstress, so I think I’ll put her to work! I'm sure I did a sketch somewhere. If I can find it I'll share it. I'm not the best at sewing so if your partner has skills, this is really easy to make. For the adhesive Velcro make sure you get the good industria...