NACA Ducts or Lexan Vents

Discussion for builders, pilots, owners, and those interested in building or owning a Waiex.

NACA Ducts or Lexan Vents

Postby Nick » Sat Jul 08, 2023 10:29 pm

I am getting close to starting the build on my cowling. So thinking about NACA Ducts. Then it hit me that I will need air in cockpit. I have looked at other Waiex and found mostly NACA Vents on the side. I have also seen some very interesting vents on the Lexan over the front. My question is NACA or Lexan Vents? I live in Central Florida, HOT all the time. I'm building at South Lakeland Airport X49. Thanks in advance for everyone's help. Nick
Nick
Legacy Sonex Waiex 0179
Jabiru 3300 Gen1 Rotec WCH, EI, TBI
N908WX
Nick
 
Posts: 41
Joined: Thu Aug 04, 2022 10:08 pm
Location: Lakeland Florida

Re: NACA Ducts or Lexan Vents

Postby Area 51% » Sun Jul 09, 2023 7:00 am

Hi Nick, Randy here.
I believe I purchased a Waiex tail kit from you.

I installed a NACA inlet on the pilot's side of our plane with all it's plumbing and the ball vent taking up way to much space on the instrument panel. My wife didn't want air blowing directly in her face, so I installed a Van's vent on her side down by the knees.

The NACA vent was largely ineffective but you had to hold onto the paper work if you opened her Van's vent. I ended up putting in another Van's on the pilot's side.

I already have the Van's vents prepped and ready for install in the second Waiex. No NACA vents in sight.
Area 51%
 
Posts: 733
Joined: Thu Feb 18, 2016 7:57 am

Re: NACA Ducts or Lexan Vents

Postby Bryan Cotton » Sun Jul 09, 2023 8:27 am

I find my NACA vents blow a lot less air than I had hoped.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5035
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: NACA Ducts or Lexan Vents

Postby Bryan Cotton » Sun Jul 16, 2023 7:31 pm

Here is an enhancement I made for my vents. It's two pieces riveted together and it hooks on the back edge of the NACA vent. It might stay on without tape but I'm not sure.
vent augmenter.png
vent augmenter.png (458.77 KiB) Viewed 1615 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5035
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: NACA Ducts or Lexan Vents

Postby karmarepair » Mon Jul 17, 2023 12:57 am

karmarepair
 
Posts: 160
Joined: Sun Oct 11, 2020 8:13 pm

Re: NACA Ducts or Lexan Vents

Postby Onex107 » Mon Jul 17, 2023 9:06 am

You can't beat the Van's Vents for performance and price. In the Onex with one on each side about knee high there was no need for a sunshade if you wear a hat.
OneX 107
N2107X
Onex107
 
Posts: 494
Joined: Mon Mar 24, 2014 6:44 pm
Location: Peoria, IL

Re: NACA Ducts or Lexan Vents

Postby DCASonex » Mon Jul 17, 2023 9:46 am

I used Van's SV-1 NACA vents feeding black plastic eyeball vents on my A series Sonex. They really do blast air when fully opened. Might not be quite as effective on the B series Sonex with its straight sides.

David A.
DCASonex
 
Posts: 904
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA


Return to Waiex

Who is online

Users browsing this forum: No registered users and 8 guests