Sebring Expo

Tell about and show off the best photos from your cross country trips

Sebring Expo

Postby N111YX » Wed Jan 14, 2015 12:02 pm

Because we're not allowed to reply to the Sonex-originated threads, I have to ask...where is Joe? :o

Georgia and a lot of the southeast USA has been socked in for days now. Hopefully, he made it out of Wisconsin.

I might just fly down if the sun comes out...
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1050 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 705
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Sebring Expo

Postby ScottM-Sonex1629 » Wed Jan 14, 2015 1:01 pm

Good question Kip,

I wondered that as well (about Joe's progress). I believe the AeroVee Turbo demonstrator is N123SX (based upon the video Jeremy made showing the performance of this engine)...so I checked on any status via flight aware and can find no flight plan filed for the trip.

Hopefully he makes it okay and we get some real world experience report of the performance for the trip to Sebring.
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Sebring Expo

Postby MichaelFarley56 » Wed Jan 14, 2015 2:02 pm

Joe stopped last night in Marion, IL for the night. I'm not sure where he is now but I think the hope was to make good progress today based on forecast conditions for tomorrow through southern GA and northern FL.

I'm also excited to hear how the trip goes and how the new engine does! If I catch any updates I'll advise. Hopefully Joe can chime in here as well!

Update: Joe is at Corinth, MS at this point. Ceilings are low futher south so I'm not sure how much additional progress poor Joe will make.
Mike Farley
Waiex #0056 - N569KM
Jabiru 3300A #1706
MGL Panel
MichaelFarley56
 
Posts: 1474
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Sebring Expo

Postby Bruce593SX » Wed Jan 14, 2015 2:46 pm

I too am looking forward to hearing real world cross country numbers from Joe... I received my Turbo kit yesterday and need to decide on a prop...

Anyone remember which prop the demonstrator has installed?? I'm leaning toward the climb prop as the cruise speed appears to still be impressive and I believe it would be a bit less stress on the engine??
Bruce Johnson
Sonex 593 AeroVee Turbo
Plans building near San Antonio, TX
Bruce593SX
 
Posts: 99
Joined: Fri Aug 15, 2014 9:59 am

Re: Sebring Expo

Postby MichaelFarley56 » Wed Jan 14, 2015 3:16 pm

Bruce,

Take a look on the Sonex website and pull up the ordering form for propellers. You will find two models of Snesneich prop available, a "climb" and a "cruise". I think the climb is a 54 x 50", and the cruise is a 56 x 52". The order form will specify what the exact models are.
Mike Farley
Waiex #0056 - N569KM
Jabiru 3300A #1706
MGL Panel
MichaelFarley56
 
Posts: 1474
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Sebring Expo

Postby Bruce593SX » Wed Jan 14, 2015 8:28 pm

Yup, that is the decision! ;-)
Bruce Johnson
Sonex 593 AeroVee Turbo
Plans building near San Antonio, TX
Bruce593SX
 
Posts: 99
Joined: Fri Aug 15, 2014 9:59 am

Re: Sebring Expo

Postby ldmill » Wed Jan 14, 2015 9:37 pm

It's been sub zero up here in central Iowa for most of the last few weeks, so understand why Joe didn't leave earlier. Today was "t-shirt" weather, was 20f when I left for work this morning at 7:00am!
Lorin Miller
N81YX
ldmill
 
Posts: 90
Joined: Mon Nov 21, 2011 2:30 am


Return to Trip reports

Who is online

Users browsing this forum: No registered users and 8 guests

cron