SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

W11-03 web spacer- material?

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.
Post a reply

W11-03 web spacer- material?

Postby Bryan Cotton » Thu Nov 12, 2015 11:07 pm

Hey all,
For the .032" web spacers, do you use the 1' by 2' piece of sheet?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5069
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: W11-03 web spacer- material?

Postby Darick » Fri Nov 13, 2015 8:56 am

Yes Bryan, that's what I did and haven't used all of it yet. I only have the cockpit forward to complete. "On the gear before the new year?"
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA
Top

Re: W11-03 web spacer- material?

Postby GordonTurner » Fri Nov 13, 2015 11:27 am

Me too. I called the factory about it and they told me that's the piece.

Gordon
Waiex 158 New York. N88YX registered.
3.0 Liter Corvair built, run, and installed.
Garmin panel, Shorai LiFePo batteries.
GordonTurner
 
Posts: 646
Joined: Tue Feb 21, 2012 1:14 am
Location: NY, NY
Top

Re: W11-03 web spacer- material?

Postby Bryan Cotton » Fri Nov 13, 2015 11:31 am

Thanks guys! I think the packing list has a typo. The only wing parts it lists to make from that stock is W14-03. I don't think that p/n exists.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5069
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: W11-03 web spacer- material?

Postby Rynoth » Fri Nov 13, 2015 12:29 pm

Same here. Sliced up that 1' x 2' piece in my band saw.

http://www.rynoth.com/wordpress/waiex/2 ... 4-spacers/
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Post a reply

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 20 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.