Page 1 of 2
Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Mon Oct 15, 2012 8:21 pm
by Sonex1517
Anyone considering Aveo "blingtips" contact me via PM....
Robbie
Sonex 1517
Sent from my iPad using Tapatalk HD
Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Tue Oct 16, 2012 10:18 pm
by Sonex1517
Couple shots of my "blingtips" - arrived today way late and after a major hassle.
I trimmed them a bit and did a test fit. The glossy finish is great, but no way I can recommend them after my experience....
Robbie
Sonex 1517
Sent from my iPad using Tapatalk HD
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 1:10 am
by onex28
Robbie, what can you tell me about the "bling tips". I went to Aveo's website and could not find info on them. How light are they and what was your experience with Aveo on the fit, quality and service? PM if you wish. David
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 1:51 pm
by Mike53
Just curious, but why the secrecy .If I have a bad experience with a vendor I want everyone to know.That is what is great about the internet. Bad service or a lousy product will be found out in the end but if you can forewarn others they can do diligent research on their own,ask questions in other forums and come to a decision on their own whether to still buy from said company or look elsewhere .
If you want to play it perfectly safe you just express it as "your experience " or "your opinion".Two things you are still allowed in a free society. :D
Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 8:16 pm
by Sonex1517
I wasn't aware of any secrecy.
Robbie
Sonex 1517
Sent from my iPad using Tapatalk HD
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 9:03 pm
by Mike53
Right,...as you wish.
Cheers
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 9:22 pm
by Sonex1517
Right. So "in my experience" and in "my opinion" there are times to post and times not to post. It is a somewhat free country....
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 9:43 pm
by Mike53
Yikes! you win
Cheers.
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 10:45 pm
by fastj22
Those aveo tips look nice.
However, I went with these.
http://www.gaugepods.com/aircraft.htmlIts a vacuum formed plastic that bolt onto the stock sonex tips. They came out nice. and cheap.
Re: Aveo wingtips
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Oct 17, 2012 11:14 pm
by MichaelFarley56
fastj22 wrote:Those aveo tips look nice.
However, I went with these.
http://www.gaugepods.com/aircraft.htmlIts a vacuum formed plastic that bolt onto the stock sonex tips. They came out nice. and cheap.
I used the exact same ones with 4 nutplates on each wingtip to hold them in place. One added bonus I've used is that, with these tips, I was able to use a hole saw and my Dremel to cut an oval around 5" X 8" underneath that works as a wingtip inspection hole. This way ill be able to check wiring, spar condition, etc without removing the whole wing tip.