Inspections

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Inspections

Postby Sonex1517 » Wed Aug 03, 2011 9:00 pm

A good question and one to pose here.

What are the legal and practical requirements for having your work looked at prior to closing something up?
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1651
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Re: Inspections

Postby Andy Walker » Wed Aug 03, 2011 10:12 pm

Not required, but highly recommended. You should locate a EAA Tech Counselor in your area. I had them look at my tail before riveting, and will do the same with fuselage. The EAA recommends a total of three Tech visits during your build. Get the counselor to sign the EAA form and it will even lower your insurance if you do all three visits.
User avatar
Andy Walker
 
Posts: 375
Joined: Sat Jul 02, 2011 10:27 pm

Re: Inspections

Postby Sonex1517 » Wed Aug 03, 2011 10:17 pm

Thanks Andy! I already had one visit - next one will be prior to closing the horozontal stabilizers. I closed the vertical with just my wife and I looking after taking a lot of detailed photos for reference.

Someone else asked in a Pm so I figured I would put it out here for discussion...
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1651
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Re: Inspections

Postby MichaelFarley56 » Wed Aug 03, 2011 10:29 pm

I'm not an FAA employee or a DAR, but to the best of my knowledge there are no legal requirements to have anything checked prior to your airworthiness inspection in order to get the actual airworthiness certificate.

Genearlly speaking however, it's never a bad idea to have things looked over prior to closing up anything. I would recommend either a Technical Advisor, fellow Sonex builder, or if nothing else another homebuilder (and the more the merrier). Is this your first homebuilt project?
Mike Farley
Waiex #0056 - N569KM
Jabiru 3300A #1706
MGL Panel
MichaelFarley56
 
Posts: 1475
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Inspections

Postby Sonex1517 » Wed Aug 03, 2011 11:40 pm

Mike

Yes, but the question was rhetorical. I fully intend to have the thing looked at repeatedly.
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1651
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland

Re: Inspections

Postby MichaelFarley56 » Fri Aug 05, 2011 8:37 am

Hi Robbie, please don't take offense to me asking if this is your first project. My thought when asking was that I've seen many people who are repeat builders gather lots of outside input for their first (and maybe second) build projects, but as experience is gained and multiple aircraft are finished they will then just build and not worry so much about outside inspections. I can see their point but in my personal opinion, it never hurts to have multiple eyes looking at something so nothing gets missed.
Mike Farley
Waiex #0056 - N569KM
Jabiru 3300A #1706
MGL Panel
MichaelFarley56
 
Posts: 1475
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Inspections

Postby Sonex1517 » Mon Aug 08, 2011 12:41 pm

Mike

None taken! More people that critique my efforts the better.

I was away at Soace Camp with my son and just now back to reality.

Robbie
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
325+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1651
Joined: Fri Jun 03, 2011 10:11 am
Location: Chicagoland


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 16 guests