SonexBuilders.net

Please join us on Zoom this Saturday, May 2nd 2020 for our next virtual fly in.

Up this week in the following order:

Gabe DeVault - Electric Xenos
Mike Alexander - Jabiru Engine Swap
Robert Barber - Gen 4 Jabiru Installation

We will post a meeting ID later in the week.

Robbie Culver

Mike Schofield from Dynon is set to present Dynon avionics as the 4th presenter

If there are other avionics manufacturers interested in participating please have them contact Jeff or I

Thanks
Robbie Culver

Saturday May 2nd, 2020 at 1500 central time.

If my math is correct that is 2000 Zulu

On Zoom.

Meeting ID: 595 392 2944

Password is the same. It’s the name of the aircraft that began the entire line of experimental aircraft we are enthusiasts, Builders, and pilots of. Not the YX, not the X wing, not the solo seat. The password starts with a capital letter.

Please join us! We are again doing two sessions with a short break in between. 40 minutes each session.

Watch for the snarky ATIS Saturday morning. If anyone acts suspicious they better be able to tell me the ATIS code. (Poor mans extra security)

We have all done a great job of avoiding politics and not being sent into a holding pattern. Let’s keep it that way please.

* Stay well away airport information Delta time 1955 Zulu
* Wind 140 at 7
* Visibility 10 miles, skies clear
* Temperature 26, dew point 13
* Altimeter 30.01
* Runway 18 in use
* Remarks:
Maintain six foot minimum spacing at all times.
Taxiway Alpha closed due to parked aircraft. Runway 9-27 closed due to runway contamination.
Pilots discussing politics can expect to be told to go around.
Pilots failing to observe minimum spacing can expect to be quarantined for 14 days.
Shelter at home order extended 30 days
All pilots read back runway and hold short assignments.
* Advise on initial contact you have information Delta

Thanks for joining us today everyone! We had over 50 participants, and it was cool to see John Monnett and hear from him about a possible homecoming event.

Same time, same bat channel next week. Jeff and I are always looking for people who want to show their projects, tips, tricks, or completed aircraft.

Thanks for hosting. This was my first chance to "dial" in and I really enjoyed it.

I’m glad you enjoyed it!

What other subjects should we try to cover, folks? No promises but we need ideas!