random user submitted photo
URGENT WANTED - MGL RDAC
3 posts
• Page 1 of 1
URGENT WANTED - MGL RDAC
by GraemeSmith » Tue Jul 19, 2022 12:28 pm
July 19
I'm currently semi-broken down in Iowa with a part failed RDAC.
Does anyone have an MGL Avionics RDAC X Rev B mounted on a 129B connector Board.
While local flying is probable - X-Country trip home would be unwise.
401 864 1897
graeme@graemejwsmith.com
I'm currently semi-broken down in Iowa with a part failed RDAC.
Does anyone have an MGL Avionics RDAC X Rev B mounted on a 129B connector Board.
While local flying is probable - X-Country trip home would be unwise.
401 864 1897
graeme@graemejwsmith.com
Graeme JW Smith
-
GraemeSmith - Posts: 939
- Joined: Sat May 18, 2019 8:58 am
- Location: RI
Re: URGENT WANTED - MGL RDAC
by GordonTurner » Tue Jul 19, 2022 4:25 pm
Hi Graeme
Can’t help you with the part. But day vfr nothing is required. If you don’t have a mechanical oil pressure and tach, you can pick up a mechanical oil pressure gauge/kit and do a temp install. Maybe the same auto parts store has something like a tiny tach as well. Should be all you need to comfortably get home, day vfr…
Good luck, Gordon
Can’t help you with the part. But day vfr nothing is required. If you don’t have a mechanical oil pressure and tach, you can pick up a mechanical oil pressure gauge/kit and do a temp install. Maybe the same auto parts store has something like a tiny tach as well. Should be all you need to comfortably get home, day vfr…
Good luck, Gordon
Waiex 158 New York. N88YX registered.
3.0 Liter Corvair built, run, and installed.
Garmin panel, Shorai LiFePo batteries.
3.0 Liter Corvair built, run, and installed.
Garmin panel, Shorai LiFePo batteries.
- GordonTurner
- Posts: 646
- Joined: Tue Feb 21, 2012 1:14 am
- Location: NY, NY
Re: URGENT WANTED - MGL RDAC
by GraemeSmith » Tue Jul 19, 2022 5:45 pm
Thanks Gordon. I kinda want the EGT and CHT as in this heat it is a bit finicky to get right.
Good news - thanks to the two who respondsd and units are on the way.
Case resolved.
Good news - thanks to the two who respondsd and units are on the way.
Case resolved.
Graeme JW Smith
-
GraemeSmith - Posts: 939
- Joined: Sat May 18, 2019 8:58 am
- Location: RI
3 posts
• Page 1 of 1
Return to Avionics and Instruments
Who is online
Users browsing this forum: No registered users and 5 guests
