ADSB-IN traffic alerts

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

ADSB-IN traffic alerts

Postby GraemeSmith » Thu Aug 18, 2022 9:44 am

Attached is a Special Airworthiness Bulletin drawing attention to a recent mid-air in Alaska where it is believed a contributing factor was the lack of AURAL traffic alerts from the ADSB-IN.

With so many of us flying ADSB-OUT units that may or may not have IN functionality and with the IN being displayed on the likes of an iPad - rather than installed equipment - the actual TSO being referenced may not be strictly applicable. But there IS an applicable lesson about having AURAL traffic alerts enabled on your set up if you are able to do so.

2022-16.pdf
(201.44 KiB) Downloaded 140 times
Graeme JW Smith
User avatar
GraemeSmith
 
Posts: 939
Joined: Sat May 18, 2019 8:58 am
Location: RI

Re: ADSB-IN traffic alerts

Postby XenosN42 » Fri Aug 19, 2022 8:22 am

I have aural traffic conflicts enabled on my MGL Explore iEFIS system. I find it really useful. The area I fly in is fairly crowded, and even then there aren't so many messages that it's annoying. An example message is: "Traffic 11 o'clock high"

Link to the bulletin: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID172467804220220817183022.0001
-- Michael
OneX N169XE
author of the 'Flight Data Viewer'
XenosN42
 
Posts: 412
Joined: Thu Jul 24, 2014 4:45 pm
Location: PA, USA


Return to Avionics and Instruments

Who is online

Users browsing this forum: N265DF and 6 guests