measuring com power at the antenna

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

Re: measuring com power at the antenna

Postby daleandee » Mon Nov 28, 2022 1:55 am

From the article:

Generally, a larger diameter antenna will give you broader band performance. That is, an
antenna that is large in diameter or flat and wide like the internal dipoles will give you much
better broadband performance than a thin stainless steel antenna. When a thin stainless steel
antenna is tuned to 127 MHz (roughly the middle of the aircraft band) the maximum broadband
performance it can give is around 5 MHz whereas larger diameter antennas can give broadband
performance over 10 MHz range.


https://www.craggyaero.com/User%20Guide ... 0Guide.pdf
daleandee
 
Posts: 802
Joined: Fri Feb 01, 2013 6:14 pm

Previous

Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 5 guests