Revmaster 2300 electrical schematic?

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Revmaster 2300 electrical schematic?

Postby 984dm » Sun Dec 11, 2022 10:57 am

Hello,

Could anyone using the Revmaster 2300 engine direct me to, or supply me with, an example of the common electrical schematic/layout for the installation of that engine? I thought I had seen some examples in the past from the Aeroelectric Connections book, but have not been able to locate any of those schematics.

Thanks for your help!
Dave M.
Bloomer, WI
Legacy Sonex N984DM (N number reserved, project is a work in progress)
Tri gear with center stick
Revmaster 2300
MGL XTreme EFIS/EMS, MGL V6, Sandia STX 165
984dm
 
Posts: 39
Joined: Wed Jul 25, 2012 6:39 pm

Re: Revmaster 2300 electrical schematic?

Postby BRS » Sun Dec 11, 2022 11:08 am

984dm wrote:Hello,

Could anyone using the Revmaster 2300 engine direct me to, or supply me with, an example of the common electrical schematic/layout for the installation of that engine? ...

Thanks for your help!


Hi Dave,
Can you be a bit more specific? As I recall there are only two circuits, Alternator & Starter. Then of course there is the instruments (oilP, oilT, EGT, CHT, etc). It helps to break wiring down to subsystems. Is this a new installation from Joe or is this from another aircraft?
-brs
-Brock
Sonex-A (s/n 1013)
R2300, P-tip 54/50
Center Stick
V16, TT22
User avatar
BRS
 
Posts: 365
Joined: Thu Aug 20, 2020 4:50 pm


Return to Sonex

Who is online

Users browsing this forum: No registered users and 7 guests