random user submitted photo
SNX-W08
1 post
• Page 1 of 1
SNX-W08
by Darick » Sat Jun 14, 2014 9:40 am
Detail "A". Bolt direction holding W20-02 and W20-03 is not clear. Here is tech support guidance in quotes...
"The two lower bolts are installed from the forward side.
The bottom note applies to the top and bottom bolt, the top note applies to
the four bolts in the center of the spar."
However, don't let the top view confuse you. I think the bolt is in backwards on the drawing and should be installed from the AFT side, not the forward side as in the drawing. I sent a note to tech support on this.
"The two lower bolts are installed from the forward side.
The bottom note applies to the top and bottom bolt, the top note applies to
the four bolts in the center of the spar."
However, don't let the top view confuse you. I think the bolt is in backwards on the drawing and should be installed from the AFT side, not the forward side as in the drawing. I sent a note to tech support on this.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
-
Darick - Posts: 496
- Joined: Mon Aug 05, 2013 9:39 pm
- Location: PA
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests
