by vernd » Fri Dec 05, 2014 8:46 pm
Hi - just about to drill the 4 wing attach blocks in preparation for attaching to W11-05. It appears that these holes and dimensions on W11-05 are critical for later alignment of the spars/wings for drilling. Are there any suggestions for drilling at this point to prevent grief at a some later point of installation of wings. Or just move ahead as per the plans.
I know there's been lots of discussion on related topics already, so would appreciate any learnings from those who have ventured here before.
Thanks much.
Vern
Sonex 613 (Slow scratch build)
Innisfail, AB, Canada
Vern Dueck - Innisfail, Alberta
Sonex 613 Slow Scratchbuild
Taildragger , Aerovee(turbo),