SonexBuilders.net

I am a little embarrassed to ask, but could someone please confirm the location of the wing rib spacers for me. It looks like the installation sequence/order is, back to front, the fwd edge of the aft rib, then the -03 spacer (.125"), then the -02 spacer (.032"), and then the spar. The exception would be the locations where only the -02 spacer is used, and it is between the fwd edge of the aft rib and the spar. Have reviewed several builder's websites and haven't gotten a clear look at this, and have seen a couple with only the -02 spacers installed so want to be sure.

Thanks,

Doug

Here is a link to my builders page. I can't see it I my phone but you may be able to see it on a larger screen.
http://websites.expercraft.com/gripdana ... g_id=70139

I will try to post some photos in the Sonex 1534 photo album later tonight.

Thanks for the help. After reviewing the photos and taking a better look at the spar construction, I confirmed that the order is correct. Thanks again.