by Bryan Cotton » Thu Sep 24, 2015 10:02 pm
Hey all,
Not sure if I have the sonex plans page right. Let me know and I will fix.
The plans say to use paper shims between the phenolic spacer and the angles to get a snug fit. I don't seem to need shims as I have about .018" of clearance. This seems good to me but I am interested to hear what others got for a snug fit.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23