by sport65 » Sun Sep 07, 2014 10:24 pm
I put my wings on for rigging the other day and it made me start thinking about wiring the nav/strobe lights.
The led strobe lights have shielded wiring. I want to install a quick connect plug at the wing root, to facilitate wing removal. What type of connector do you have to use for this with the shielding? I was told by a friend to use a normal connector and connect the shielding into the connector as a wire would be. I guess this leaves the plug connector unshielded. Does this sound correct? or is there another way?
Thanks Jeff
Jeff
Sonex 1570, standard gear, matco independant brakes and wheels, aileron trim, MGL iefis, V6 radio, Uavionix adsb, stx-165 transponder, Jabiru 3300
Finished
Ponder Tx