by kevinh » Sun Mar 11, 2018 1:14 am
cool! For printing the ninjaflex I'd recommend first doing a test print in something easy (like PLA). Then switch to the ninjaflex and print _very_ slowly (30mm/s or so) and turn off the default "retraction" settings in your slicer app (because retraction and flexible filaments can cause jams during printing).
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (
photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)