Rubber pieces in oil

Discussion of the Aerovee kit engine.

Rubber pieces in oil

Postby pilotyoung » Fri May 24, 2024 12:29 am

I drained the oil in my AeroVee engine Tuesday and found little pieces of rubber in the oil screen. I have the mini-sump kit on my engine. I am wondering if anyone has any idea what the pieces of rubber could be. I am including a picture of the pieces on a white paper towel.
Attachments
IMG_0978.jpeg
pilotyoung
 
Posts: 188
Joined: Fri Jun 07, 2019 7:31 am

Re: Rubber pieces in oil

Postby bvolcko38 » Fri May 24, 2024 8:39 am

The only thing I can think of is possibly parts of a damaged O ring.
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 272
Joined: Fri Feb 19, 2016 7:40 am

Re: Rubber pieces in oil

Postby BRS » Fri May 24, 2024 6:56 pm

Looks like gasket material. Perhaps from the sump cover?
-Brock
Sonex-A (s/n 1013)
R2300, P-tip 54/50
Center Stick
V16, TT22
User avatar
BRS
 
Posts: 391
Joined: Thu Aug 20, 2020 4:50 pm

Re: Rubber pieces in oil

Postby Raluttio » Thu May 30, 2024 9:00 am

How many hours on the engine? If it is still in the double digits then my first thought is a couple big chunks of excess gasket maker broke loose. The only rubber in the engine is the six o-rings on the case studs - this doesn't look like one of those though.
Rodger
KBUU
Sonex #0828
N622CV
Aerovee 2.1 #0937
Raluttio
 
Posts: 7
Joined: Thu May 02, 2024 6:21 pm

Re: Rubber pieces in oil

Postby pilotyoung » Thu May 30, 2024 9:06 am

The engine has over 400 hours on it.
pilotyoung
 
Posts: 188
Joined: Fri Jun 07, 2019 7:31 am


Return to Aerovee

Who is online

Users browsing this forum: No registered users and 47 guests