Page 1 of 1

Fuel Pump Inlet Strainer

PostPosted: Sat Jan 23, 2021 7:36 pm
by racaldwell
Today I modified the fuel pump by drilling and tapping 1/8" NPT hole for the inlet so I can use AN fittings for my hoses. I did not know there is a small strainer inside the fuel pump. So another strainer to check on the condition inspections.

Hard to believe the fuel flow test would pass with such small ports in the fuel pump. At my inlet is now larger.

Rick Caldwell
Xenos 0057
CAMit 3300 0088