Page 1 of 4

Corvair Engines - B Model

PostPosted: Tue Mar 19, 2024 3:54 pm
by SnakePilot
Unless I missed it, I haven't been able to find a conversation about using a Corvair in a Waiex B build.

Will anyone admit to considering a B/Corvair?
Are there airframe differences from the A model that preclude this?
Has anyone built, or know of a B/Corvair engine mount source?
Has anyone built, or know of a B/Corvair cowling source?
Is there a source for a B auxiliary tank?

Lots of great information and engineering theory in this thread to keep the Experimental movement alive!

Re: Corvair Engines - B Model

PostPosted: Tue Mar 19, 2024 11:13 pm
by daleandee
Deleted as dupicate

Re: Corvair Engines - B Model

PostPosted: Wed Mar 20, 2024 12:27 am
by SnakePilot
Dale, thanks for your reply and the good information. I did watch several of your videos before receiving your PM. I'm going to do a lot more research with your threads but I also have a lot of history with a Corvair engine in 3 Corsa 140s I owned and a Greenbrier, so love wrenching on that engine!

Re: Corvair Engines - B Model

PostPosted: Wed Mar 20, 2024 11:16 pm
by lakespookie
http://www.azaleaaviation.com/products/ ... gines.html

Just ran across this site and talking to Bill had been positive I am probably going this route at this point

I am sending him a jabiru tricycle mount so he can probably work out a jig from that, for other b models as the mounting points won't change

Re: Corvair Engines - B Model

PostPosted: Thu Mar 21, 2024 4:33 pm
by lakespookie
My engine mount is on the way to be modified and the engine is ordered only big ticket item left is the avionics lol. Snake if you do reach out to bill at azalea tell him jill sent you lol.

Re: Corvair Engines - B Model

PostPosted: Thu Mar 21, 2024 7:19 pm
by SnakePilot
Thanks, Jill.
Anxious to see how the B mount and engine work out. I haven't decided which Corvair format I prefer, but interested to also hear from FlyCovair and Azalea owners about their installs. Cheers!

Re: Corvair Engines - B Model

PostPosted: Thu Mar 21, 2024 8:10 pm
by lakespookie
I anticipate the performance should be the same 120 HP is 120 HP, granted prop choice has some influence, if you build it all your self the FlyCorvair folks will get you flying at a decent price, if you are looking to purchase a built corvair your options are FLYSPA at around 20k depending on how much of the kit you have them assemble and core etc. vs 13k. for the spyder corvair.

Obviously FWF and other cost add on to that but i am very happy with the price i got on the full kit including engine, FWF, and Prop. Granted until i have it in hand and installed its all up in the air.

I was also able to get an upgraded Alternator at 65 amps which makes me feel much better considering the avionics and lighting i am including in my kit.

Re: Corvair Engines - B Model

PostPosted: Thu Mar 21, 2024 10:53 pm
by SnakePilot
Jill,
Did Bill give you an estimate of completed weight?

Re: Corvair Engines - B Model

PostPosted: Fri Mar 22, 2024 10:35 am
by GordonTurner
Discussion of this on William Wynnes Corvair Facebook group:

https://www.facebook.com/groups/1117842 ... 7S9Ucbxw6v

Re: Corvair Engines - B Model

PostPosted: Fri Mar 22, 2024 11:01 am
by SnakePilot
Thanks, Gordon. Now... if I just had a FB account to fully take advantage of the WW site. Just too cantankerous to modernize!