by XenosN42 » Wed Mar 17, 2021 12:51 pm
Hey,
After posting my previous response I noticed that I forgot to answer two specific questions.
Q: What is your sequence of installation? Shoot pins first or bolt first?
I have always inserted the bolt first. I have found that when the pins are inserted first it is more difficult to push the bolt into place.
Q: Have you added another or larger work hole in the bottom or top of the wing?
No. The existing hole is big enough to insert your hand and then you'll have to insert the bolt by feel not by sight. It takes a bit of practice, but it's not difficult at all. Yes, it can get a bit frustrating for a minute or two, but you'll be rewarded when the bolt finally slips through the outboard spar plate.
Context: I've flown my OneX for about 6 years now and I've removed and installed the wings twice over that span. I also built a XENOS and have considerable experience with installing those wings. Very different procedure and technique. OneX is much easier, if only because I can do it myself without any special equipment.
-- Michael
OneX N169XE
author of the 'Flight Data Viewer'